What is the purpose of a watt regulator in my ceiling fan? [solved]

Question

Engineer20213259 Asked 12 years ago

What is the purpose of a watt regulator in my ceiling fan? [solved]

The lights on my harbor breeze fan stopped working this morning. When I came home from work, I got the ladder and took down the lights. I don't have a multimeter but I saw that there is this Watt Regulator (pic below) in the fan. I traced the wires and it seems that this may have been the culprit. I snipped the wires, got some wire nuts, and wired directly into the 120V circuit. Ta-da! Lights are back and fan is working normal.

Question is : What is the purpose of this watt regulator? Why do some fans include it?

alt text

113

10

Can you post a pic of this where the label is legible? - Mike Powell 12 years ago

@Mike: I'll have to try. It says "120V 300W MAX" by Hunter. Part Number 98480-02 Hunter. UL certification here: google.com/… - Engineer2021 12 years ago

See comment on Mike Powell's answer. - Tester101 12 years ago

I should add that a year later, this fan is still working great w/o the regulator. - Engineer2021 11 years ago

Thanks so much for the info I almost gave 49.95 to replace the part i did not need, now that i bypassed it it works just fine and the way they installed it you can bypass it with no tools just hook the two whites together and then the other two together the electrical ends are made for this to work - user4036 11 years ago

Thank you all for your collaboration! I ran into this issue luckily this was the first place I came. Bypassed the stupid regulator and fan works great. You won't need this regulator u less you try to put ridiculous bulbs in there. Thanks again every one for saving my land lord $50 ;-) - user12320 9 years ago

nearly 3 years later and no fires or problems. Fan works great - Engineer2021 9 years ago

And... it's still going! - Engineer2021 8 years ago

4 Answers Found

+1 for referencing the (somewhat silly) regulation. I'm a little confused as to why the device in question would be labeled MAX 300W if the regs require less than 190W of lighting - mac 10 years ago

@mac , The other 110 watts would likely account for the fan motor. - Zv_oDD 6 years ago

Diveon61 Answered 11 years ago

The Wattage regulator has nothing to do with speed of fan or brightness of bulbs or for a remote. It is a safety feature that prevents the fan from overheating. If you install bulbs that exceed the specified wattage, the wattage regulator either shuts off the bulbs or limits the wattage they receive to prevent overheating. Contact the manufacturer and they should send you a new light kit.

75

1

still doesn't make sense because I use CFLs which are low wattage. - Engineer2021 10 years ago

Mike Powell9254 Answered 12 years ago

A regulator would normally be used either to change the speed of the fan or the brightness of the lights. If this regulator didn't have any external controls like a pull chain, is there a chance this fan at one time had a remote control?

67

2

brand new fan.. did not come with a remote control. I just installed it about a month ago - Engineer2021 12 years ago

It's possible that this model and a more pricey model are both manufactured at the same time. The only difference being the more expensive fan gets an RF receiver to control the regulator and this one does not. This is common practice in manufacturing, and possibly the reason the fan has "extra" parts. It's even possible that this model is ready for a remote, they just did not include one and charged less because of it. This might also explain why the lights stopped working, if something was on the same frequency it could have turned them off. - Tester101 12 years ago

Susan2440 Answered 1 week ago

Ceiling fan works but not the lights diagnosing the problem wattage limiter/switch & repairing it

0

Answer this question

Share this Page

Click "Copy this Link" to copy page link to clipboard

score 88 · Accepted Answer

Here's the real story:

http://www1.eere.energy.gov/buildings/appliance_standards/residential/ceiling_fans.html

As required by the Energy Policy Act of 2005 (EPACT 2005), the U.S. Department of Energy (DOE) has established test procedures and energy conservation standards for ceiling fans and for ceiling fan light kits.

Ceiling fan light kits with any other socket type including but not limited to candelabra screw base sockets, intermediate screw-base sockets, 2-pin halogen sockets, and bayonet sockets manufactured on or after January 1, 2009, shall not be capable of operating with lamps that total more than 190 watts and must be packaged with lamps that together total 190 watts or less. DOE indicated in a January 11, 2007, final rule that it recognizes that manufacturers may choose to follow one of several possible design pathways to ensure that the light kit is not capable of operating with lamps that total more than 190 watts.

http://www.regulations.gov/#!documentDetail;D=EERE-2006-TP-0121-0003

DOE is interpreting the 190-watt limit on power consumption for certain ceiling fan light kits as a design requirement. This approach will require that manufacturers incorporate some measure such as a fuse, circuit breaker or current-limiting device to ensure the light kit is not capable of operating with a lamp or lamps totaling more than 190 watts.